新闻详情

·玻璃反应釜技术指标

下面反应釜网的小编跟大家介绍透明玻璃反应釜主要技术指标。

玻璃反应釜

应安装在符合防爆要求的操作室内,在装备多台反应釜时,应分开放置,每两台之间应用安全的防爆墙隔开,每间操作室均应有通向室外的通道和出口,当存在易爆介质时应保证设备地通风良好。

打开包装后检查设备有无损坏,根据设备型号按后面的结构图将设备安装起来,加热方式如果是导热油电加热,请按照使用温度购买相应型号的导热油(注意:导热油绝对不允许含有水分)加入(油量保持适量),勿将加油口拧死以免产生压力,所配备件按照装箱单查清。

玻璃反应釜采用高强度的石英或硼硅玻璃制成,在抗压、耐温、抗腐蚀等方面都有较大的优越性,尤其是釜体的良好透明度,便于观察介质反应变化过程,并为釜内介质反应过程拍片、摄像创造了优异的条件。反应釜设备的夹套、半管传热属于强制对流传热,液体换热时,传热系数是流速、流体物理性质、系统的几何形状的函数,夹套的几何形状决定了其内部流速较慢,且有死角,换热系数较小。气体换热时,由于气体的性质和传热特点,传热系数取决于冷凝液膜的厚度和导热系数,半管和夹套传热基本相同。

1、容积0.5~2L。

2、反应釜工作压力 ≤ 1.2Mpa。

4、加热方式为直接不锈钢电加热管加热或夹套导热油电加热管加热或电加热套直接加热。

5、主体材料采用1Gr18Ni9Ti、00Gr17Ni14MO2、TA2和石英玻璃或硼硅玻璃结合而成。

下面反应釜网致力于反应釜、不锈钢反应釜的生产制造,产品质量好,价格合理,深受广大客户业界好评,如果您有什么需要请咨询我们!

英文:The following reaction kettle network of small series with you to introduce the main technical indicators of the transparent glass reactor.

Glass reaction kettle should be installed in the operating room with explosion-proof requirements, should be separated from the equipment, each of the two units of the application of the safety of explosion-proof wall separated, each operating room should lead to the outside of the channel and export, when the presence of explosive media should ensure that the ventilation is good.

After opening the package, check the equipment is not damaged, according to the device type according to the structure diagram of the device is installed, heating mode if it is heat conduction oil electric heating, please according to the use temperature to buy the corresponding type of heat conduction oil (Note: heat conduction oil absolutely does not allow containing water) to add (the amount of oil), do not put the gas hole to produce the pressure, the equipment in accordance with the packing list.

Glass reaction kettle is made of high strength of quartz or borosilicate glass made in compressive strength, temperature resistance, corrosion resistance and so on have great advantages, especially in the kettle body good transparency, facilitate the observation of the change process of the reaction medium, and reaction process of medium in the kettle film, camera to create excellent conditions. The jacket and heat transfer coefficient of the reaction kettle equipment is the forced convection heat transfer. The heat transfer coefficient is a function of flow velocity, fluid physical property and system geometry. The geometry of the clip sets is slow and has a dead angle, and the heat transfer coefficient is small. The heat transfer coefficient depends on the thickness and the heat transfer coefficient of the condenser, and the heat transfer coefficient of the liquid film is basically the same as that of the heat transfer coefficient of the liquid film.

1, volume 0.5~2L.

2, the reactor working pressure is less than 1.2Mpa.

3, the reactor temperature is less than or equal to 220 DEG C.

4, heating method for direct heating of stainless steel electric heating tube or jacket heat conduction oil heating or electric heating heating.

5, the main materials used 00Gr17Ni14MO2, TA2, 1Gr18Ni9Ti and quartz glass or a combination of silicon glass.

The following reaction kettle network dedicated to the reaction kettle, stainless steel reaction kettle production, product quality is good, the price is reasonable, by the majority of customers in the industry, if you have any need to consult us!

BACK

版权所有:河南省寿泰反应釜有限公司, All rights reserved

地址:河南省三门峡  电话:0398-890603  邮箱: tdzdqp@pandabamboofloor.com